Moldplus V11 Software License Installation
This How-To article will show you how to install the software license for Moldplus V11.
The current PC user must have administrative rights to be able to install the single hardware license.
Moldplus V11 software must be installed prior to following these instructions.
This procedure must be done for a new license and also every year maintenance is purchased.
The Moldplus V11 software license can be installed on multiple computers, but can only be used on one computer at a time with the matching Mastercam USB Hasp.
A Software License of Mastercam will only allow installation of the Moldplus V11 software license on the computer using the Mastercam software license.
These instructions do not apply for a Moldplus Network License!
Instructions
Follow the these steps to install the Moldplus V11 Software License:
From the Mastercam window, Browse to the Moldplus Tab on the Ribbon Bar and click on Moldplus Help.
From the Moldplus Help pop-up, click on Moldplus License to bring up the “Moldplus License” window.
In the Local XML License file area, click on Register.
Browse to the .xml file from your reseller, select the file and then click Open.
The Moldplus License window will return with some License information. Click on Close. The Moldplus Software License is now installed.
If you will use more than 1 Robotmaster V6 software license on this computer, you can repeat steps 1-5 again for the additional licenses. If you are finished installing Robotmaster V6 software licenses click the RED X in the top corner of the Robotmaster License Updater application to close it.
If for any reason you feel that you might not be using a legitimate copy of Robotmaster, please contact Intercam support at support [at] intercamsa.com. Include in your email the SIM # on the purple/red/blue HASP with your email as well as your company and contact information.
You can also open the Robotmaster License Updater application by double-clicking on the .rmlic file.
Installation Video
