Access the Spray Module
The spraying module can only be used a license with the spraying capabilities is purchased. For more information about the spraying licensing, contact your re-seller.
To access the spray module, our operation must contain a spraying tool.
Otherwise, the spray module will be unavailable.
To create a spraying tool the user must:
Open the tool manager.
Click on the “+” icon.
Click on spraying.
Set the spraying parameters.
Figure 1: Adding a spraying tool.
The figure below shows the tool manager with two spraying tools.
Figure 2: Tool Manager containing two spraying tools.
With the task programmed, now we can access the spray module in the device mode as Figure 3 shows.
Figure 3: Accessing the spray module.